FreeBSD Man PagesIndex:
ascii(7)build(7)
clocks(7)
development(7)
ditroff(7)
environ(7)
ffs(7)
firewall(7)
groff(7)
groff_char(7)
groff_diff(7)
groff_man(7)
groff_mdoc(7)
groff_me(7)
groff_mm(7)
groff_mmse(7)
groff_ms(7)
groff_trace(7)
groff_www(7)
hier(7)
hostname(7)
intro(7)
lint(7)
maclabel(7)
mailaddr(7)
man(7)
mdoc(7)
mdoc.samples(7)
me(7)
miscellaneous(7)
mm(7)
mmse(7)
ms(7)
operator(7)
orig_me(7)
ports(7)
re_format(7)
release(7)
roff(7)
sdoc(7)
security(7)
sprog(7)
stdint(7)
symlink(7)
term(7)
tuning(7)
groff(7)
NAME
groff - a short reference for the GNU roff language
DESCRIPTION
The name groff stands for GNU roff and is the free implementation of
the roff type-setting system. See roff(7) for a survey and the back-
ground of the groff system.
This document gives only short descriptions of the predefined roff lan-
guage elements as used in groff. Both the classical features and the
groff extensions are provided.
Historically, the roff language was called troff. groff is compatible
with the classical system and provides proper extensions. So in GNU,
the terms roff, troff, and groff language could be used as synonyms.
However troff slightly tends to refer more to the classical aspects,
whereas groff emphasizes the GNU extensions, and roff is the general
term for the language.
This file is only a short version of the complete documentation that is
found in the groff info(1) file, which contains more detailed, actual,
and concise information.
The general syntax for writing groff documents is relatively easy, but
writing extensions to the roff language can be a bit harder.
The roff language is line-oriented. There are only two kinds of lines,
control lines and text lines. The control lines start with a control
character, by default a period "." or a single quote "'"; all other
lines are text lines.
Control lines represent commands, optionally with arguments. They have
the following syntax. The leading control character can be followed by
a command name; arguments, if any, are separated by blanks from the
command name and among themselves, for example,
.command_name arg1 arg2
For indentation, any number of space or tab characters can be inserted
between the leading control character and the command name, but the
control character must be on the first position of the line.
Text lines represent the parts that will be printed. They can be modi-
fied by escape sequences, which are recognized by a leading backslash
`\'. These are in-line or even in-word formatting elements or func-
tions. Some of these take arguments separated by single quotes "'",
others are regulated by a length encoding introduced by an open paren-
thesis `(' or enclosed in brackets `[' and `]'.
The roff language provides flexible instruments for writing language
extension, such as macros. When interpreting macro definitions, the
roff system enters a special operating mode, called the copy mode.
The copy mode behavior can be quite tricky, but there are some rules
that ensure a safe usage.
This does not produce the most efficient code, but it should work as a
first measure. For better strategies, see the groff info file and
groff_tmac(5).
Reading roff source files is easier, just reduce all double backslashes
to a single one in all macro definitions.
GROFF ELEMENTS
The roff language elements add formatting information to a text file.
The fundamental elements are predefined commands and variables that
make roff a full-blown programming language.
There are two kinds of roff commands, possibly with arguments.
Requests are written on a line of their own starting with a dot `.' or
a "'", whereas Escape sequences are in-line functions and in-word for-
matting elements starting with a backslash `\'.
The user can define her own formatting commands using the de request.
These commands are called macros, but they are used exactly like
requests. Macro packages are pre-defined sets of macros written in the
groff language. A user's possibilities to create escape sequences her-
self is very limited, only special characters can be mapped.
The groff language provides several kinds of variables with different
interfaces. There are pre-defined variables, but the user can define
her own variables as well.
String variables store character sequences. They are set with the ds
request and retrieved by the \* escape sequences. Strings can have
variables.
Register variables can store numerical values, numbers with a scale
unit, and occasionally string-like objects. They are set with the nr
request and retrieved by the \n escape sequences.
Environments allow the user to temporarily store global formatting
parameters like line length, font size, etc. for later reuse. This is
done by the ev request.
Fonts are identified either by a name or by an internal number. The
current font is chosen by the ft request or by the \f escape sequences.
Each device has special fonts, but the following fonts are available
for all devices. R is the standard font Roman. B is its bold counter-
part. The italic font is called I and is available everywhere, but on
text devices it is displayed as an underlined Roman font. For the
graphical output devices, there exist constant-width pendants of these
fonts, CR, CI, and CB. On text devices, all characters have a constant
width anyway.
Moreover, there are some advanced roff elements. A diversion stores
information into a macro for later usage. A trap is a positional con-
dition like a certain number of lines from page top or in a diversion
or in the input. Some action can be prescribed to be run automatically
when the condition is met.
More detailed information and examples can be found in the groff info
file.
special behavior can be delayed by using the \. escape. By
using the cc request, the control character can be set to a dif-
ferent character, making the dot `.' a non-special character.
In all other positions, it just means a dot character. In text
paragraphs, it is advantageous to start each sentence at a line
of its own.
' The single quote has two controlling tasks. At the beginning of
a line and in the conditional requests it is the non-breaking
control character. That means that it introduces a request like
the dot, but with the additional property that this request
doesn't cause a linebreak. By using the c2 request, the non-
break control character can be set to a different character.
As a second task, it is the most commonly used argument separa-
tor in some functional escape sequences (but any pair of charac-
ters not part of the argument will work). In all other posi-
tions, it denotes the single quote or apostrophe character.
Groff provides a printable representation with the \(cq escape
sequence.
" The double quote is used to enclose arguments in requests,
macros, and strings. In the ds and as requests, a leading dou-
ble quote in the argument will be stripped off, making every-
thing else afterwards the string to be defined (enabling leading
whitespace). The escaped double quote \" introduces a comment.
Otherwise, it is not special. Groff provides a printable repre-
sentation with the \(dq escape sequence.
\ The backslash usually introduces an escape sequence (this can be
changed with the ec request). A printed version of the escape
character is the \e escape; a backslash glyph can be obtained by
\(rs.
( The open parenthesis is only special in escape sequences when
introducing an escape name or argument consisting of exactly two
characters. In groff, this behavior can be replaced by the []
construct.
[ The opening bracket is only special in groff escape sequences;
there it is used to introduce a long escape name or long escape
argument. Otherwise, it is non-special, e.g. in macro calls.
] The closing bracket is only special in groff escape sequences;
there it terminates a long escape name or long escape argument.
Otherwise, it is non-special.
space Space characters are only functional characters. They separate
the arguments in requests, macros, and strings, and the words in
text lines. They are subject to groff's horizontal spacing cal-
culations. To get a defined space width, escape sequences like
`\ ' (this is the escape character followed by a space), \|, \^,
or \h should be used.
newline
In text paragraphs, newlines mostly behave like space charac-
ters. Continuation lines can be specified by an escaped new-
A numerical value is a signed or unsigned integer or float with or
without an appended scaling indicator. A scaling indicator is a one-
character abbreviation for a unit of measurement. A number followed by
a scaling indicator signifies a size value. By default, numerical val-
ues do not have a scaling indicator, i.e., they are normal numbers.
The roff language defines the following scaling indicators.
c Centimeter
i Inch
P Pica = 1/6 inch
p Point = 1/72 inch
m Em = the font size in points (width of letter `m')
M 100th of an Em
n En = Em/2
u Basic unit for actual output device
v Vertical line space in basic units scaled
point = 1/sizescale of a point (defined in font DESC
file)
f Scale by 65536.
Numerical expressions are combinations of the numerical values defined
above with the following arithmetical operators already defined in
classical troff.
+ Addition
- Subtraction
* Multiplication
/ Division
% Modulo
= Equals
== Equals
< Less than
> Greater than
<= Less or equal
>= Greater or equal
& Logical and
: Logical or
! Logical not
( Grouping of expressions
) Close current grouping
Moreover, groff added the following operators for numerical expres-
sions:
e1>?e2 The maximum of e1 and e2.
e1<?e2 The minimum of e1 and e2.
(c;e) Evaluate e using c as the default scaling indicator.
For details see the groff info file.
CONDITIONS
Conditions occur in tests raised by the if, ie, and the while requests.
The following table characterizes the different types of conditions.
N A numerical expression N yields true if its value is
greater than 0.
!N True if the value of I is 0.
n Formatter is nroff.
rreg True if there is a register named reg.
t Formatter is troff.
REQUESTS
This section provides a short reference for the predefined requests.
In groff, request and macro names can be arbitrarily long. No bracket-
ing or marking of long names is needed.
Most requests take one or more arguments. The arguments are separated
by space characters (no tabs!); there is no inherent limit for their
length or number. An argument can be enclosed by a pair of double
quotes. This is very handy if an argument contains space characters,
e.g., "arg with space" denotes a single argument.
Some requests have optional arguments with a different behaviour. Not
all of these details are outlined here. Refer to the groff info file
and groff_diff(7) for all details.
In the following request specifications, most argument names were cho-
sen to be descriptive. Only the following denotations need clarifica-
tion.
c denotes a single character.
font a font either specified as a font name or a font num-
ber.
anything all characters up to the end of the line or within \{
and \}.
n is a numerical expression that evaluates to an integer
value.
N is an arbitrary numerical expression, signed or
unsigned.
+-N has three meanings depending on its sign, described
below.
If an expression defined as +-N starts with a `+' sign the resulting
value of the expression will be added to an already existing value
inherent to the related request, e.g. adding to a number register. If
the expression starts with a `-' the value of the expression will be
subtracted from the request value.
Without a sign, N replaces the existing value directly. To assign a
negative number either prepend 0 or enclose the negative number in
parentheses.
Request Short Reference
. Empty line, ignored. Useful for structuring documents.
.\" anything
Complete line is a comment.
.ab string
Print string on standard error, exit program.
.ad Begin line adjustment for output lines in current adjust
mode.
.ad c Start line adjustment in mode c (c=l,r,b,n).
.af register c
Assign format c to register (c=l,i,I,a,A).
.aln alias register
Create alias name for register.
ister macro until .. is encountered.
.ami macro end
Append to a macro indirectly. macro and end are string reg-
isters whose contents are interpolated for the macro name and
the end macro, respectively.
.am1 macro
Same as .am but with compatibility mode switched off during
macro expansion.
.am1 macro end
Same as .am but with compatibility mode switched off during
macro expansion.
.as stringvar anything
Append anything to stringvar.
.asciify diversion
Unformat ASCII characters, spaces, and some escape sequences
in diversion.
.as1 stringvar anything
Same as .as but with compatibility mode switched off during
string expansion.
.backtrace
Print a backtrace of the input on stderr.
.bd font N
Embolden font by N-1 units.
.bd S font N
Embolden Special Font S when current font is font.
.blm Unset the blank line macro.
.blm macro
Set the blank line macro to macro.
.box End current diversion.
.box macro
Divert to macro, omitting a partially filled line.
.boxa End current diversion.
.boxa macro
Divert and append to macro, omitting a partially filled line.
.bp Eject current page and begin new page.
.bp +-N Eject current page; next page number +-N.
.br Line break.
.brp Break and spread output line. Same as \p.
.break Break out of a while loop.
.c2 Reset no-break control character to "'".
.c2 c Set no-break control character to c.
.cc Reset control character to `.'.
.cc c Set control character to c.
.ce Center the next input line.
.ce N Center following N input lines.
.cf filename
Copy contents of file filename unprocessed to stdout or to
the diversion.
.cflags mode c1 c2 ...
Treat characters c1, c2, ... according to mode number.
.ch trap N
Change trap location to N .
.char c anything
Define character c as string anything.
.chop object
Chop the last character off macro, string, or diversion
object.
.close stream
.cp N If N is zero disable compatibility mode, otherwise enable it.
.cs font N M
Set constant character width mode for font to N/36 ems with
em M.
.cu N Continuous underline in nroff, like .ul in troff.
.da End current diversion.
.da macro Divert and append to macro.
.de macro Define or redefine macro until .. is encountered.
.de macro end
Define or redefine macro until .end is called.
.de1 macro
Same as .de but with compatibility mode switched off during
macro expansion.
.de1 macro end
Same as .de but with compatibility mode switched off during
macro expansion.
.defcolor color scheme component
Define or redefine a color with name color. scheme can be
rgb, cym, cymk, gray, or grey. component can be single com-
ponents specified as fractions in the range 0 to 1 (default
scaling indicator f), as a string of two-digit hexadecimal
color components with a leading #, or as a string of four-
digit hexadecimal components with two leading #. The color
default can't be redefined.
.dei macro
Define or redefine a macro whose name is contained in the
string register macro until .. is encountered.
.dei macro end
Define or redefine a macro indirectly. macro and end are
string registers whose contents are interpolated for the
macro name and the end macro, respectively.
.di End current diversion.
.di macro Divert to macro .
.do name Interpret .name with compatibility mode disabled.
.ds stringvar anything
Set stringvar to anything.
.ds1 stringvar anything
Same as .ds but with compatibility mode switched off during
string expansion.
.dt N trap
Set diversion trap to position N (default scaling indica-
tor v).
.ec Reset escape character to `\'.
.ec c Set escape character to c.
.ecr Restore escape character saved with .ecs.
.ecs Save current escape character.
.el anything
Else part for if-else (ie) request.
.em macro The macro will be run after the end of input.
.eo Turn off escape character mechanism.
.ev Switch to previous environment.
.ev env Push down environment number or name env and switch to it.
.evc env Copy the contents of environment env to the current environ-
ment. No pushing or popping.
.ex Exit from roff processing.
.fam Return to previous font family.
.fam name Set the current font family to name.
.fc Disable field mechanism.
.fp n internal external
Mount font with long external name to short internal name on
position n.
.fschar f c anything
Define fallback character c for font f as string anything.
.fspecial font
Reset list of special fonts for font to be empty.
.fspecial font s1 s2 ...
When the current font is font, then the fonts s1, s2, ...
will be special.
.ft Return to previous font. Same as \f[] or \fP.
.ft font Change to font name or number font; same as \f[font] escape
sequence.
.ftr font1 font2
Translate font1 to font2.
.hc Remove additional hyphenation indicator character.
.hc c Set up additional hyphenation indicator character c.
.hcode c1 code1 c2 code2 ...
Set the hyphenation code of character c1 to code1, that of c2
to code2, etc.
.hla lang Set the current hyphenation language to lang.
.hlm n Set the maximum number of consecutive hyphenated lines to n.
.hpf file Read hyphenation patterns from file.
.hpfa file
Append hyphenation patterns from file.
.hpfcode file
Set input mapping for .hpf.
.hw words List of words with exceptional hyphenation.
.hy N Switch to hyphenation mode N.
.hym n Set the hyphenation margin to n (default scaling indica-
tor m).
.hys n Set the hyphenation space to n.
.ie cond anything
If cond then anything else goto .el.
.if cond anything
If cond then anything; otherwise do nothing.
.ig Ignore text until .. is encountered.
.ig end Ignore text until .end.
.in Change to previous indent value.
.in +-N Change indent according to +-N (default scaling indicator m).
.it N trap
Set an input-line count trap for the next N lines.
.itc N trap
Same as .it but count lines interrupted with \c as one line.
.kern Enable pairwise kerning.
.kern n If n is zero, disable pairwise kerning, otherwise enable it.
.lc Remove leader repetition character.
.lc c Set leader repetition character to c.
.length register anything
Write the length of the string anything in register.
.linetabs Enable line-tabs mode (i.e., calculate tab positions relative
to output line).
.linetabs n
If n is zero, disable line-tabs mode, otherwise enable it.
.lf N Set input line number to N.
.lf N file
Set input line number to N and filename to file.
.lg N Ligature mode on if N>0.
.mc c Print character c after each text line at actual distance
from right margin.
.mc c N Set margin character to c and distance to N from right margin
(default scaling indicator m).
.mk register
Mark current vertical position in register.
.mso file The same as the .so request except that file is searched in
the tmac directories.
.na No output-line adjusting.
.ne Need a one-line vertical space.
.ne N Need N vertical space (default scaling indicator v).
.nf No filling or adjusting of output-lines.
.nh No hyphenation.
.nm Number mode off.
.nm +-N [M [S [I]]]
In line number mode, set number, multiple, spacing, and
indent.
.nn Do not number next line.
.nn N Do not number next N lines.
.nop anything
Always execute anything.
.nr register +-N M
Define or modify register using +-N with auto-increment M.
.nroff Make the built-in condition n true and t false.
.ns Turn no-space mode on.
.nx Immediately jump to end of current file.
.nx filename
Next file.
.open stream filename
Open register filename for writing and associate the stream
named register stream with it.
.opena stream filename
Like .open but append to it.
.os Output vertical distance that was saved by the sv request.
.output string
Emit string directly to intermediate output, allowing leading
whitespace if string starts with " (which will be stripped
off).
.pc Reset page number character to `%'.
.pc c Page number character.
.pi program
Pipe output to program (nroff only).
.pl Set page length to default 11i. The current page length is
stored in register .p.
.pl +-N Change page length to +-N (default scaling indicator v).
.pm Print macro names and sizes (number of blocks of 128 bytes).
.pm t Print only total of sizes of macros (number of 128 bytes
blocks).
.pn +-N Next page number N.
.pnr Print the names and contents of all currently defined number
registers on stderr.
.po Change to previous page offset. The current page offset is
available in register .o.
.po +-N Page offset N.
.ps Return to previous point-size.
.ps +-N Point size; same as \s[+-N].
.psbb filename
Get the bounding box of a PostScript image filename.
.rchar c1 c2 ...
Remove the definitions of characters c1, c2, ...
.rd prompt
Read insertion.
.return Return from a macro.
.rfschar f c1 c2 ...
Remove the definitions of characters c1, c2, ... for font f.
.rj n Right justify the next n input lines.
.rm name Remove request, macro, or string name.
.rn old new
Rename request, macro, or string old to new.
.rnn reg1 reg2
Rename register reg1 to reg2.
.rr register
Remove register.
.rs Restore spacing; turn no-space mode off.
.rt +-N Return (upward only) to marked vertical place (default scal-
ing indicator v).
.schar c anything
Define global fallback character c as string anything.
.shc Reset soft hyphen character to \(hy.
.shc c Set the soft hyphen character to c.
.shift n In a macro, shift the arguments by n positions.
.sizes s1 s2 ... sn [0]
Set available font sizes similar to the sizes command in a
DESC file.
.so filename
Include source file.
.sp Skip one line vertically.
.sp N Space vertical distance N up or down according to sign of N
(default scaling indicator v).
.special Reset global list of special fonts to be empty.
.special s1 s2 ...
Fonts s1, s2, etc. are special and will be searched for char-
acters not in the current font.
.spreadwarn
Toggle the spread warning on and off without changing its
value.
.spreadwarn limit
Emit a warning if each space in an output line is widened by
limit or more (default scaling indicator m).
.ss N Space-character size set to N/12 of the spacewidth in the
current font.
.ss N M Space-character size set to N/12 and sentence space size set
to M/12 of the spacewidth in the current font (=1/3 em).
.sty n style
Associate style with font position n.
.substring xx n1 n2
Replace the string named xx with the substring defined by the
indices n1 and n2.
.sv Save 1v of vertical space.
.sv N Save the vertical distance N for later output with os
request.
.sy command-line
Execute program command-line.
.ta T N Set tabs after every position that is a multiple of N
(default scaling indicator m).
.ta n1 n2 ... nn T r1 r2 ... rn
.tl 'left'center'right'
Three-part title.
.tm anything
Print anything on terminal (UNIX standard message output).
.tm1 anything
Print anything on terminal (UNIX standard message output),
allowing leading whitespace if anything starts with " (which
will be stripped off).
.tmc anything
Similar to .tm1 without emitting a final newline.
.tr abcd...
Translate a to b, c to d, etc. on output.
.trf filename
Transparently output the contents of file filename.
.trin abcd...
This is the same as the tr request except that the asciify
request will use the character code (if any) before the char-
acter translation.
.trnt abcd...
This is the same as the tr request except that the transla-
tions do not apply to text that is transparently throughput
into a diversion with \!.
.troff Make the built-in condition t true and n false.
.uf font Underline font set to font (to be switched to by .ul).
.ul N Underline (italicize in troff) N input lines.
.unformat diversion
Unformat space characters and tabs, preserving font informa-
tion in diversion.
.vpt n Enable vertical position traps if n is non-zero, disable them
otherwise.
.vs Change to previous vertical base line spacing.
.vs +-N Set vertical base line spacing according to +-N (default
scaling indicator p). Default value is 12p.
.warn n Set warnings code to n.
.warnscale si
Set scaling indicator used in warnings to si.
.wh N Remove (first) trap at position N.
.wh N trap
Set location trap; negative means from page bottom.
.while cond anything
While condition cond is true, accept anything as input.
.write stream anything
Write anything to the stream named stream.
.writec stream anything
Similar to .write without emitting a final newline.
.writem stream xx
Write contents of macro or string xx to the stream named
stream.
Besides these standard groff requests, there might be further macro
calls. They can originate from a macro package (see roff(7) for an
overview) or from a preprocessor.
Preprocessor macros are easy to be recognized. They enclose their code
into a pair of characteristic macros.
+-------------+-------------+------------+
| tbl | .TS | .TE |
+-------------+-------------+------------+
ESCAPE SEQUENCES
Escape sequences are in-line language elements usually introduced by a
backslash `\' and followed by an escape name and sometimes by a
required argument. Input processing is continued directly after the
escaped character or the argument resp. without an intervening separa-
tion character. So there must be a way to determine the end of the
escape name and the end of the argument.
This is done by enclosing names (escape name and arguments consisting
of a variable name) by a pair of brackets [name] and constant arguments
(number expressions and characters) by apostrophes (ASCII 0x27) like
'constant'.
There are abbreviations for short names. Two character escape names
can be specified by an opening parenthesis like \(xy without a closing
counterpart. And all one-character names different from the special
characters `[' and `(' can even be specified without a marker in the
form \c.
Constant arguments of length 1 can omit the marker apostrophes, too,
but there is no two-character analogue.
While 1-character escape sequences are mainly used for in-line func-
tions and system related tasks, the 2-letter names following the \(
construct are used for special characters predefined by the roff sys-
tem. Escapes sequences with names of more than two characters \[name]
denote user defined named characters (see the char request).
Single Character Escapes
\" Beginning of a comment. Everything up to the end of the line is
ignored.
\# Everything up to and including the next newline is ignored.
This is interpreted in copy mode. This is like \" except that
the terminating newline is ignored as well.
\*s The string stored in the string variable with 1-character name
s.
\*(st The string stored in the string variable with 2-character name
st.
\*[stringvar arg1 arg2 ...]
The string stored in the string variable with arbitrary length
name stringvar, taking arg1, arg2, ... as arguments.
\$0 The name by which the current macro was invoked. The als
request can make a macro have more than one name.
\$x Macro or string argument with 1-place number x, where x is a
digit between 1 and 9.
\$(xy Macro or string argument with 2-digit number xy.
\$[nexp]
Macro or string argument with number nexp, where nexp is a
numerical expression evaluating to an integer >=1.
\$* In a macro or string, the concatenation of all the arguments
separated by spaces.
\$@ In a macro or string, the concatenation of all the arguments
with each surrounded by double quotes, and separated by spaces.
\\ reduces to a single backslash; useful to delay its interpreta-
tion as escape character in copy mode. For a printable back-
\% Default optional hyphenation character.
\! Transparent line indicator.
\?anything?
In a diversion, this will transparently embed anything in the
diversion. anything is read in copy mode. See also the escape
sequences \! and \?.
\space Unpaddable space-size space character (no line break).
\0 Digit width.
\| 1/6 em narrow space character; zero width in nroff.
\^ 1/12 em half-narrow space character; zero width in nroff.
\& Non-printable, zero width character.
\) Like \& except that it behaves like a character declared with
the cflags request to be transparent for the purposes of end of
sentence recognition.
\/ Increases the width of the preceding character so that the spac-
ing between that character and the following character will be
correct if the following character is a roman character.
\, Modifies the spacing of the following character so that the
spacing between that character and the preceding character will
correct if the preceding character is a roman character.
\~ Unbreakable space that stretches like a normal inter-word space
when a line is adjusted.
\: Inserts a zero-width break point (similar to \% but without a
soft hyphen character).
\newline
Ignored newline, for continuation lines.
\{ Begin conditional input.
\} End conditional input.
\(sc The special character with 2-character name sc, see section Spe-
cial Characters.
\[name]
The named character (or rather glyph) with arbitrary length name
name.
\[comp1 comp2 ...]
A composite glyph with components comp1, comp2, ...
\a Non-interpreted leader character.
\A'anything'
If anything is acceptable as a name of a string, macro, diver-
sion, register, environment or font it expands to 1, and to 0
otherwise.
\b'abc...'
Bracket building function.
\B'anything'
If anything is acceptable as a valid numeric expression it
expands to 1, and to 0 otherwise.
\c Interrupt text processing.
\C'char'
The character called char; same as \[char], but compatible to
other roff versions.
\d Forward (down) 1/2 em vertical unit (1/2 line in nroff).
\D'charseq'
Draw a graphical element defined by the characters in charseq;
see groff info file for details.
\e Printable version of the current escape character.
\E Equivalent to an escape character, but is not interpreted in
copy-mode.
\fF Change to font with 1-character name or 1-digit number F.
\fP Switch back to previous font.
Change to font family with arbitrary length name fam.
\F[] Switch back to previous font family.
\g[reg]
Return format of register with name reg suitable for .af.
Alternative forms \g(xy and \gx.
\h'N' Local horizontal motion; move right N (left if negative).
\H'N' Set height of current font to N.
\k[reg]
Mark horizontal input place in register with arbitrary length
name reg. Alternative forms \k(xy and \kx.
\l'Nc' Horizontal line drawing function (optionally using character c).
\L'Nc' Vertical line drawing function (optionally using character c).
\m[color]
Change to color color. Alternative forms \m(co and \mc.
\m[] Switch back to previous color.
\M[color]
Change filling color for closed drawn objects to color color.
Alternative forms \M(co and \Mc.
\M[] Switch to previous fill color.
\nr The numerical value stored in the register variable with the
1-character name r.
\n(re The numerical value stored in the register variable with the
2-character name re.
\n[reg]
The numerical value stored in the register variable with arbi-
trary length name reg.
\N'n' Typeset the character with code n in the current font, no spe-
cial fonts are searched. Useful for adding characters to a font
using the char request.
\o'abc...'
Overstrike characters a, b, c, etc.
\O0 Disable glyph output. Mainly for internal use.
\O1 Enable glyph output. Mainly for internal use.
\p Break and spread output line.
\r Reverse 1 em vertical motion (reverse line in nroff).
\R'name +-n'
The same as .nr name +-n.
\s[+-N]
Set the point size to N scaled points. Note the alternative
forms \s+-[N], \s'+-N', \s+-'N', \s(+-xy, \s+-(xy, \s+-x. Same
as ps request.
\S'N' Slant output N degrees.
\t Non-interpreted horizontal tab.
\u Reverse (up) 1/2 em vertical motion (1/2 line in nroff).
\v'N' Local vertical motion; move down N (up if negative).
\V[env]
The contents of the environment variable env. Alternative forms
\V(xy and \Vx.
\w'string'
The width of the character sequence string.
\x'N' Extra line-space function (negative before, positive after).
\X'string'
Output string as device control function.
\Y[name]
Output string variable or macro name uninterpreted as device
control function. Alternative forms \Y(xy and \Yx.
\zc Print c with zero width (without spacing).
\Z'anything'
acters.
If a backslash is followed by a character that does not constitute a
defined escape sequence the backslash is silently ignored and the char-
acter maps to itself.
Special Characters
Common special characters are predefined by escape sequences of the
form \(xy with characters x and y. Some of these exist in the usual
font while most of them are only available in the special font. Below
you'll find a selection of the most important glyphs; a complete list
can be found in groff_char(7).
\(bu Bullet sign
\(co Copyright
\(ct Cent
\(dd Double dagger
\(de Degree
\(dg Dagger
\(rs Printable double quote
\(em Em-dash
\(hy Hyphen
\(rg Registered sign
\(rs Printable backslash character
\(sc Section sign
\(ul Underline character
\(== Identical
\(>= Larger or equal
\(<= Less or equal
\(!= Not equal
\(-> Right arrow
\(<- Left arrow
\(+- Plus-minus sign
Strings
Strings are defined by the ds request and can be retrieved by the \*
escape sequence.
Strings share their name space with macros. So strings and macros
without arguments are roughly equivalent; it is possible to call a
string like a macro and vice-versa, but this often leads to unpre-
dictable results. The following strings are predefined in groff.
\*[.T] The name of the current output device as specified by the -T
command line option.
REGISTERS
Registers are variables that store a value. In groff, most registers
store numerical values (see section NUMERICAL EXPRESSIONS above), but
some can also hold a string value.
Each register is given a name. Arbitrary registers can be defined and
set with the request nr register.
The value stored in a register can be retrieved by the escape sequences
introduced by \n.
Most useful are predefined registers. In the following the notation
results from request calls.
\n[.$] Number of arguments in the current macro or string.
\n[.a] Post-line extra line-space most recently utilized using
\x'N'.
\n[.A] Set to 1 in troff if option -A is used; always 1 in nroff.
\n[.c] Current input line number.
\n[.C] 1 if compatibility mode is in effect, 0 otherwise.
\n[.cdp] The depth of the last character added to the current environ-
ment. It is positive if the character extends below the
baseline.
\n[.ce] The number of lines remaining to be centered, as set by the
ce request.
\n[.cht] The height of the last character added to the current envi-
ronment. It is positive if the character extends above the
baseline.
\n[.color]
1 if colors are enabled, 0 otherwise.
\n[.csk] The skew of the last character added to the current environ-
ment. The skew of a character is how far to the right of the
center of a character the center of an accent over that char-
acter should be placed.
\n[.d] Current vertical place in current diversion; equal to regis-
ter register nl.
\n[.ev] The name or number of the current environment (string-val-
ued).
\n[.f] Current font number.
\n[.fam] The current font family (string-valued).
\n[.fn] The current (internal) real font name (string-valued).
\n[.fp] The number of the next free font position.
\n[.g] Always 1 in GNU troff. Macros should use it to test if run-
ning under groff.
\n[.h] Text base-line high-water mark on current page or diversion.
\n[.H] Available horizontal resolution in basic units.
\n[.height]
The current font height as set with \H.
\n[.hla] The current hyphenation language as set by the .hla request.
\n[.hlc] The number of immediately preceding consecutive hyphenated
lines.
\n[.hlm] The maximum allowed number of consecutive hyphenated lines,
as set by the hlm request.
\n[.hy] The current hyphenation flags (as set by the hy request).
\n[.hym] The current hyphenation margin (as set by the hym request).
\n[.hys] The current hyphenation space (as set by the hys request).
\n[.i] Current ident.
\n[.in] The indent that applies to the current output line.
\n[.int] Positive if last output line contains \c.
\n[.kern] 1 if pairwise kerning is enabled, 0 otherwise.
\n[.l] Current line length.
\n[.lg] The current ligature mode (as set by the lg request).
\n[.linetabs]
The current line-tabs mode (as set by the linetabs request).
\n[.ll] The line length that applies to the current output line.
\n[.lt] The title length (as set by the lt request).
\n[.n] Length of text portion on previous output line.
\n[.ne] The amount of space that was needed in the last ne request
that caused a trap to be sprung. Useful in conjunction with
register .trunc.
\n[.pvs] The current post-vertical line spacing.
\n[.rj] The number of lines to be right-justified as set by the rj
request.
\n[.s] Current point size as a decimal fraction.
\n[.slant]
The slant of the current font as set with \S.
\n[.sr] The last requested pointsize in points as a decimal fraction
(string-valued).
\n[.t] Distance to the next trap.
\n[.T] Set to 1 if option -T is used.
\n[.tabs] A string representation of the current tab settings suitable
for use as an argument to the ta request.
\n[.trunc]
The amount of vertical space truncated by the most recently
sprung vertical position trap, or, if the trap was sprung by
a ne request, minus the amount of vertical motion produced by
.ne. In other words, at the point a trap is sprung, it rep-
resents the difference of what the vertical position would
have been but for the trap, and what the vertical position
actually is. Useful in conjunction with the register .ne
register.
\n[.ss] The value of the parameters set by the first argument of the
ss request.
\n[.sss] The value of the parameters set by the second argument of the
ss request.
\n[.u] Equal to 1 bin fill mode and 0 in nofill mode.
\n[.v] Current vertical line spacing.
\n[.V] Available vertical resolution in basic units.
\n[.vpt] 1 if vertical position traps are enabled, 0 otherwise.
\n[.w] Width of previous character.
\n[.warn] The sum of the number codes of the currently enabled warn-
ings.
\n[.x] The major version number.
\n[.y] The minor version number.
\n[.Y] The revision number of groff.
\n[.z] Name of current diversion.
Writable Registers
The following registers can be read and written by the user. They have
predefined default values, but these can be modified for customizing a
document.
\n[%] Current page number.
\n[c.] Current input line number.
\n[ct] Character type (set by width function \w).
\n[dl] Maximal width of last completed diversion.
\n[dn] Height of last completed diversion.
\n[dw] Current day of week (1-7).
\n[dy] Current day of month (1-31).
\n[hours] The number of hours past midnight. Initialized at start-up.
\n[hp] Current horizontal position at input line.
\n[llx] Lower left x-coordinate (in PostScript units) of a given
PostScript image (set by .psbb).
\n[lly] Lower left y-coordinate (in PostScript units) of a given
PostScript image (set by .psbb).
\n[ln] Output line number.
\n[minutes]
The number of minutes after the hour. Initialized at start-
\w).
\n[seconds]
The number of seconds after the minute. Initialized at
start-up.
\n[skw] Right skip width from the center of the last character in the
\w argument.
\n[slimit]
If greater than 0, the maximum number of objects on the input
stack. If <=0 there is no limit, i.e., recursion can con-
tinue until virtual memory is exhausted.
\n[ssc] The amount of horizontal space (possibly negative) that
should be added to the last character before a subscript
(generated by width function \w).
\n[st] Height of string above base line (generated by width function
\w).
\n[systat]
The return value of the system() function executed by the
last sy request.
\n[urx] Upper right x-coordinate (in PostScript units) of a given
PostScript image (set by .psbb).
\n[ury] Upper right y-coordinate (in PostScript units) of a given
PostScript image (set by .psbb).
\n[year] The current year (year 2000 compliant).
\n[yr] Current year minus 1900. For Y2K compliance use register
register year instead.
COMPATIBILITY
The differences of the groff language in comparison to classical troff
as defined by [CSTR #54] are documented in groff_diff(7).
The groff system provides a compatibility mode, see groff(1) on how to
invoke this.
BUGS
Report bugs to the groff bug mailing list <bug-groff@gnu.org>. Include
a complete, self-contained example that will allow the bug to be repro-
duced, and say which version of groff you are using.
AUTHORS
Copyright (C) 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
This document is distributed under the terms of the FDL (GNU Free Docu-
mentation License) version 1.1 or later. You should have received a
copy of the FDL on your system, it is also available on-line at the GNU
copyleft site <http://www.gnu.org/copyleft/fdl.html>.
This document is part of groff, the GNU roff distribution. It was
written by Bernd Warken <bwarken@mayn.de>; it is maintained by Werner
Lemberg <wl@gnu.org>.
SEE ALSO
The main source of information for the groff language is the groff
info(1) file. Besides the gory details, it contains many examples.
groff(1)
the usage of the groff program and pointers to the documentation
and availability of the groff system.
groff_font(5)
the specification of fonts and the DESC file.
roff(7)
the history of roff, the common parts shared by all roff sys-
tems, and pointers to further documentation.
[CSTR #54]
Nroff/Troff User's Manual by Osanna & Kernighan <http://
cm.bell-labs.com/cm/cs/54.ps> -- the bible for classical troff.
Groff Version 1.19 1 May 2003 GROFF(7)
SPONSORED LINKS
Man(1) output converted with man2html , sed , awk