FreeBSD Man Pages

kqueue(2)

NAME

     kqueue, kevent -- kernel event notification mechanism

LIBRARY

     Standard C Library (libc, -lc)

SYNOPSIS

     #include <sys/types.h>
     #include <sys/event.h>
     #include <sys/time.h>

     int
     kqueue(void);

     int
     kevent(int kq, const struct kevent *changelist, int nchanges,
	 struct kevent *eventlist, int nevents,
	 const struct timespec *timeout);

     EV_SET(&kev, ident, filter, flags, fflags, data, udata);

DESCRIPTION

     The kqueue() system call provides a generic method of notifying the user
     when an event happens or a condition holds, based on the results of small
     pieces of kernel code termed filters.  A kevent is identified by the
     (ident, filter) pair; there may only be one unique kevent per kqueue.

     The filter is executed upon the initial registration of a kevent in order
     to detect whether a preexisting condition is present, and is also exe-
     cuted whenever an event is passed to the filter for evaluation.  If the
     filter determines that the condition should be reported, then the kevent
     is placed on the kqueue for the user to retrieve.

     The filter is also run when the user attempts to retrieve the kevent from
     the kqueue.  If the filter indicates that the condition that triggered
     the event no longer holds, the kevent is removed from the kqueue and is
     not returned.

     Multiple events which trigger the filter do not result in multiple
     kevents being placed on the kqueue; instead, the filter will aggregate
     the events into a single struct kevent.  Calling close() on a file
     descriptor will remove any kevents that reference the descriptor.

     The kqueue() system call creates a new kernel event queue and returns a
     descriptor.  The queue is not inherited by a child created with fork(2).
     However, if rfork(2) is called without the RFFDG flag, then the descrip-
     tor table is shared, which will allow sharing of the kqueue between two
     processes.

     The kevent() system call is used to register events with the queue, and
     return any pending events to the user.  The changelist argument is a
     pointer to an array of kevent structures, as defined in <sys/event.h>.
     All changes contained in the changelist are applied before any pending
     events are read from the queue.  The nchanges argument gives the size of
     changelist.  The eventlist argument is a pointer to an array of kevent
     structures.  The nevents argument determines the size of eventlist.  When
     nevents is zero, kevent() will return immediately even if there is a
     ture.

     The kevent structure is defined as:

     struct kevent {
	     uintptr_t ident;	     /* identifier for this event */
	     short     filter;	     /* filter for event */
	     u_short   flags;	     /* action flags for kqueue */
	     u_int     fflags;	     /* filter flag value */
	     intptr_t  data;	     /* filter data value */
	     void      *udata;	     /* opaque user data identifier */
     };

     The fields of struct kevent are:

     ident	Value used to identify this event.  The exact interpretation
		is determined by the attached filter, but often is a file
		descriptor.

     filter	Identifies the kernel filter used to process this event.  The
		pre-defined system filters are described below.

     flags	Actions to perform on the event.

     fflags	Filter-specific flags.

     data	Filter-specific data value.

     udata	Opaque user-defined value passed through the kernel unchanged.

     The flags field can contain the following values:

     EV_ADD	    Adds the event to the kqueue.  Re-adding an existing event
		    will modify the parameters of the original event, and not
		    result in a duplicate entry.  Adding an event automati-
		    cally enables it, unless overridden by the EV_DISABLE
		    flag.

     EV_ENABLE	    Permit kevent() to return the event if it is triggered.

     EV_DISABLE     Disable the event so kevent() will not return it.  The
		    filter itself is not disabled.

     EV_DELETE	    Removes the event from the kqueue.	Events which are
		    attached to file descriptors are automatically deleted on
		    the last close of the descriptor.

     EV_ONESHOT     Causes the event to return only the first occurrence of
		    the filter being triggered.  After the user retrieves the
		    event from the kqueue, it is deleted.

     EV_CLEAR	    After the event is retrieved by the user, its state is
		    reset.  This is useful for filters which report state
		    transitions instead of the current state.  Note that some
		    filters may automatically set this flag internally.

     EV_EOF	    Filters may set this flag to indicate filter-specific EOF
		    condition.
		    there is data available to read.  The behavior of the fil-
		    ter is slightly different depending on the descriptor
		    type.

		    Sockets
			Sockets which have previously been passed to listen()
			return when there is an incoming connection pending.
			data contains the size of the listen backlog.

			Other socket descriptors return when there is data to
			be read, subject to the SO_RCVLOWAT value of the
			socket buffer.	This may be overridden with a per-fil-
			ter low water mark at the time the filter is added by
			setting the NOTE_LOWAT flag in fflags, and specifying
			the new low water mark in data.  On return, data con-
			tains the number of bytes of protocol data available
			to read.

			If the read direction of the socket has shutdown, then
			the filter also sets EV_EOF in flags, and returns the
			socket error (if any) in fflags.  It is possible for
			EOF to be returned (indicating the connection is gone)
			while there is still data pending in the socket
			buffer.

		    Vnodes
			Returns when the file pointer is not at the end of
			file.  data contains the offset from current position
			to end of file, and may be negative.

		    Fifos, Pipes
			Returns when the there is data to read; data contains
			the number of bytes available.

			When the last writer disconnects, the filter will set
			EV_EOF in flags.  This may be cleared by passing in
			EV_CLEAR, at which point the filter will resume wait-
			ing for data to become available before returning.

		    BPF devices
			Returns when the BPF buffer is full, the BPF timeout
			has expired, or when the BPF has ``immediate mode''
			enabled and there is any data to read; data contains
			the number of bytes available.

     EVFILT_WRITE   Takes a descriptor as the identifier, and returns whenever
		    it is possible to write to the descriptor.	For sockets,
		    pipes and fifos, data will contain the amount of space
		    remaining in the write buffer.  The filter will set EV_EOF
		    when the reader disconnects, and for the fifo case, this
		    may be cleared by use of EV_CLEAR.	Note that this filter
		    is not supported for vnodes or BPF devices.

		    For sockets, the low water mark and socket error handling
		    is identical to the EVFILT_READ case.

     EVFILT_AIO     The sigevent portion of the AIO request is filled in, with
		    sigev_notify_kqueue containing the descriptor of the
		    Alternatively, a kevent structure may be initialized, with
		    ident containing the descriptor of the kqueue, and the
		    address of the kevent structure placed in the
		    aio_lio_opcode field of the AIO request.  However, this
		    approach will not work on architectures with 64-bit point-
		    ers, and should be considered deprecated.

     EVFILT_VNODE   Takes a file descriptor as the identifier and the events
		    to watch for in fflags, and returns when one or more of
		    the requested events occurs on the descriptor.  The events
		    to monitor are:

		    NOTE_DELETE    The unlink() system call was called on the
				   file referenced by the descriptor.

		    NOTE_WRITE	   A write occurred on the file referenced by
				   the descriptor.

		    NOTE_EXTEND    The file referenced by the descriptor was
				   extended.

		    NOTE_ATTRIB    The file referenced by the descriptor had
				   its attributes changed.

		    NOTE_LINK	   The link count on the file changed.

		    NOTE_RENAME    The file referenced by the descriptor was
				   renamed.

		    NOTE_REVOKE    Access to the file was revoked via
				   revoke(2) or the underlying file system was
				   unmounted.

		    On return, fflags contains the events which triggered the
		    filter.

     EVFILT_PROC    Takes the process ID to monitor as the identifier and the
		    events to watch for in fflags, and returns when the
		    process performs one or more of the requested events.  If
		    a process can normally see another process, it can attach
		    an event to it.  The events to monitor are:

		    NOTE_EXIT	     The process has exited.

		    NOTE_FORK	     The process has called fork().

		    NOTE_EXEC	     The process has executed a new process
				     via execve(2) or similar call.

		    NOTE_TRACK	     Follow a process across fork() calls.
				     The parent process will return with
				     NOTE_TRACK set in the fflags field, while
				     the child process will return with
				     NOTE_CHILD set in fflags and the parent
				     PID in data.

		    NOTE_TRACKERR    This flag is returned if the system was
				     unable to attach an event to the child

		    This coexists with the signal() and sigaction() facili-
		    ties, and has a lower precedence.  The filter will record
		    all attempts to deliver a signal to a process, even if the
		    signal has been marked as SIG_IGN.	Event notification
		    happens after normal signal delivery processing.  data
		    returns the number of times the signal has occurred since
		    the last call to kevent().	This filter automatically sets
		    the EV_CLEAR flag internally.

     EVFILT_TIMER   Establishes an arbitrary timer identified by ident.  When
		    adding a timer, data specifies the timeout period in mil-
		    liseconds.	The timer will be periodic unless EV_ONESHOT
		    is specified.  On return, data contains the number of
		    times the timeout has expired since the last call to
		    kevent().  This filter automatically sets the EV_CLEAR
		    flag internally.

     EVFILT_NETDEV  Takes a descriptor to a network interface as the identi-
		    fier, and the events to watch for in fflags.  It returns,
		    when one or more of the requested events occur on the
		    descriptor.  The events to monitor are:

		    NOTE_LINKUP      The link is up.

		    NOTE_LINKDOWN    The link is down.

		    NOTE_LINKINV     The link state is invalid.

		    On return, fflags contains the events which triggered the
		    filter.

RETURN VALUES

     The kqueue() system call creates a new kernel event queue and returns a
     file descriptor.  If there was an error creating the kernel event queue,
     a value of -1 is returned and errno set.

     The kevent() system call returns the number of events placed in the
     eventlist, up to the value given by nevents.  If an error occurs while
     processing an element of the changelist and there is enough room in the
     eventlist, then the event will be placed in the eventlist with EV_ERROR
     set in flags and the system error in data.  Otherwise, -1 will be
     returned, and errno will be set to indicate the error condition.  If the
     time limit expires, then kevent() returns 0.

ERRORS

     The kqueue() system call fails if:

     [ENOMEM]		The kernel failed to allocate enough memory for the
			kernel queue.

     [EMFILE]		The per-process descriptor table is full.

     [ENFILE]		The system file table is full.

     The kevent() system call fails if:

     [EACCES]		The process does not have permission to register a
			filter.
			return.

     [EINVAL]		The specified time limit or filter is invalid.

     [ENOENT]		The event could not be found to be modified or
			deleted.

     [ENOMEM]		No memory was available to register the event.

     [ESRCH]		The specified process to attach to does not exist.

SEE ALSO

     aio_error(2), aio_read(2), aio_return(2), poll(2), read(2), select(2),
     sigaction(2), write(2), signal(3)

HISTORY

     The kqueue() and kevent() system calls first appeared in FreeBSD 4.1.

AUTHORS

     The kqueue() system and this manual page were written by Jonathan Lemon
     <jlemon@FreeBSD.org>.

BUGS

     It is currently not possible to watch a vnode(9) that resides on anything
     but a UFS file system.

     The EVFILT_NETDEV filter is currently only implemented for devices that
     use the miibus(4) driver for LINKUP and LINKDOWN operations.  Therefore,
     it will not work with many non-ethernet devices.

     The timeout value is limited to 24 hours; longer timeouts will be
     silently reinterpreted as 24 hours.

FreeBSD 5.4			April 14, 2000			   FreeBSD 5.4

SPONSORED LINKS