FreeBSD Man Pages

xe(4)

NAME

     xe -- Xircom PCMCIA Ethernet device driver

SYNOPSIS

     device xe

DESCRIPTION

     The xe driver supports PCMCIA Ethernet adapters based on Xircom CE2- and
     CE3-class hardware.  This includes devices made by Xircom along with var-
     ious OEM manufacturers.

     Please note that the xe driver only supports PCMCIA cards and their Eth-
     ernet functions.  xe does not support the on-board modem device located
     on some version of the Ethernet/modem combo cards.  In particular, Xircom
     RealPort2 cards are not supported by this driver.

     The xe driver supports the following media types:

     autoselect  Enable autoselection of media type and options.

     10Base2/BNC
		 Select 10Mbps operation on a BNC coaxial connector.

     10BaseT/UTP
		 Select 10Mbps operation on a RJ-45 connector.

     100BaseTX	 Select 100Mbps operation.

     Note that 100BaseTX operation is not available on CE2-class cards, while
     the 10Base2/BNC mode is only available on CE2-class cards.  Full-duplex
     operation is currently not supported.  For more information on configur-
     ing network interface devices, see ifconfig(8).

HARDWARE

     The xe driver supports the following cards:

     o	 Xircom CreditCard Ethernet (PS-CE2-10)
     o	 Xircom CreditCard Ethernet + Modem 28 (PS-CEM-28)
     o	 Xircom CreditCard Ethernet + Modem 33 (CEM33)
     o	 Xircom CreditCard 10/100 (CE3, CE3B)
     o	 Xircom CreditCard Ethernet 10/100 + Modem 56 (CEM56)
     o	 Xircom RealPort Ethernet 10 (RE10)
     o	 Xircom RealPort Ethernet 10/100 (RE100)
     o	 Xircom RealPort Ethernet 10/100 + Modem 56 (REM56, REM56G)
     o	 Accton Fast EtherCard-16 (EN2226)
     o	 Compaq Netelligent 10/100 PC Card (CPQ-10/100)
     o	 Intel EtherExpress Pro/100 PC Card Mobile Adapter 16 (Pro/100 M16A)
     o	 Intel EtherExpress Pro/100 LAN/Modem PC Card Adapter (Pro/100 M16B)

     Other similar devices using the same hardware may also be supported.

DIAGNOSTICS

     xe%d: Cannot allocate ioport
     xe%d: Cannot allocate irq	A fatal initialization error occurred while
     attempting to allocate system resources for the card.

     xe%d: Unable to fix your %s combo card  A fatal initialization error

SEE ALSO

     pccard(4), ifconfig(8)

HISTORY

     The xe driver first appeared in FreeBSD 3.3.

AUTHORS

     The xe device driver was written by Scott Mitchell <rsm@FreeBSD.org>.
     This manual page was written by Scott Mitchell <rsm@FreeBSD.org>, and Tom
     Rhodes <trhodes@FreeBSD.org>.

BUGS

     Supported devices will fail to attach on some machines using the NEWCARD
     PC Card framework.

     Automatic media selection is usually unreliable.

FreeBSD 5.4			 July 4, 2004			   FreeBSD 5.4

SPONSORED LINKS