EMC Legato NetWorker Commands Reference

sjirjc

SYNOPSIS

       sjirjc devname

DESCRIPTION

       The  sjirjc program tests the SJIRJC command on SJI compliant Jukeboxes
       (see libsji(1)).  This command reads internal configuration information
       and options about a Jukebox and prints it out.

       Example output for this command might look like:

                       Device: scsidev@0.2.1

                          Number of Drives: 1
                        Number Drive Pairs: 1
          Number of Import/Export Elements: 0
             Number of Import/Export Pairs: 1
                           Number of Slots: 7
                      Number of Slot Pairs: 1
              Number of Transport Elements: 1
                 Number of Transport Pairs: 1

                         Initialize Element Status Supported
                                Auto Eject Supported

       The  devname  argument  should  be  any device name that can be used to
       reach a SJI compliant Jukebox driven by the system. Typical usage is in
       constructing  the  name  that contains the SCSI Bus, the SCSI Target ID
       and the SCSI Lun on that target, e.g., scsidev@0.4.0.

       Since the SJI specification allows for multiple disjoint sets  of  ele-
       ments, you will always see a count of 'Pairs' (but the author has never
       run across a value other than '1'). The output displays the  number  of
       man drives, slots, transports (gripper arm), and input/export elements.

       In addition, various internal library options are printed out.

SEE ALSO

       libsji(1)

ADVERTISEMENT